Page 7 - SCHERDELnews 2/16e

tart producing standard

is 100% inspection

The SCHERDELGroup works tireless-
ly to guarantee the quality of its prod- Contact
ucts: this includes carrying out leak
TOGO SCHERDEL GmbH
pressure tests for the unit composed of
Am Federnwerk 1
clamp, hose and connector, clamping
09496 Marienberg
force tests at the hose clamp as well as
Germany
production accompanying tests such as
gap size tests, dimensional tests, corro-
Tel.: +49 3735 710-950
sion tests and tape tests. Hose clamps
Fax: +49 3735 710-955
from TSG offer space saving solutions,
Email:
enable the use of common release
info@togo.scherdel.de
tools and provide ergonomic advan-
The hose clamps are pre-tensioned during this
stage of production. tages in terms of assembly. According
to the specific application, they ensure Plant Manager
accordance with both European and resistance to high pressure, uniform
Japanese standards. A 'dip-spin surface pressure thanks to optimum – TECHNOLOGY & PRODUCT DEVELOPMENT – NEWS AND INFORMATION
method' can be used to provide them roundness and a permanent self-adjust-
with a laminar zinc base coating and an ing effect. (dk)
inorganic top coating. Furthermore, the
experts at TSG are proud of the results
of the corrosion tests demanded by
customers. On average, the hose
clamps remain undamaged when ex-
posed to salt spray for more than 1000
hours. The standard hose clamps are
classified into three types, A, B and C, Dr. Ing. Stefan Kleditzsch
with type B reserved for space-saving Tel.: +49 3735 710-970
hose clamps (RSS). While the standard Email:
hose clamps, with the exception of a stefan.kleditzsch@
version with a handy clip, are not pre- togo.scherdel.de
opened, TSG also offers the pre-ten-
sioned K locking and Z locking sys-
Hose Clamp Sales
tems. The latter two systems are both
Extensive technical expertise and resources to Manager
SCHERDEL in-house developments. All
ensure quality standards are met. This system is
the hose clamps of the Z locking series used to measure clamping forces.
can be installed as individual parts us-
ing hose clamp pliers or as a bonded
version, as is the case with space-sav-
ing hose clamps. OEMs are usually
provided with K locking products by the MECHANICAL ENGINEERING – LOCATIONS
respective suppliers in a finished as-
sembly part. They require a bonding
point on the hose to guarantee secure
positioning. In contrast to Japan where
uniquely developed hose clamps are
Theodor Planner
used for each specific application,
Tel.: +49 9231 603-341
OEMs and suppliers in Europe and the
Fax: +49 9231 603-395
USA rely on DIN 3021 as the worldwide
Email:
standard for the manufacture of hose
theodor.planner@
clamps. Incidentally, SCHERDEL has
scherdel.de
an enviable reputation throughout
Europe for supplying top-quality hose
clamps measuring just 6 mm in diameter. 7